NEWS |
Moist plum rain weather photo machine maintenance precautions
Category: FAQ
Date: 2018-09-20
Click: 5306
Collection:
Original Link: displaynews.html?id=2878315937858432
The air humidity of the photo machine under normal working conditions cannot be higher than 70% and lower than 20%. Before and after the Qingming in the south is the season with the most humid air
The air humidity of the photo machine under normal working conditions cannot be higher than 70% and lower than 20%. Before and after the Qingming in the south is the season with the most humid air in the most humid season (commonly known as Huinantian). The indoor items will be attached with more or less water drops because of the excessive humidity of the air. Under this humidity, the real machine cannot work normally.
When the air humidity exceeds 70%, the motherboard of the photo machine will become wet and affect the performance of the machine and consumables. The most obvious performance is that the image is wet and wet, the adhesion is reduced, and the image caused by the inkjet malfunction is disorganized. Then burn the motherboard. For the precautions for the use of wet weather photo machines, share some notes with you: 1. Control the air humidity in the room. The humid air is invaded by the outside. We can put the photo machine in a closed place and then turn on the dehumidifier, which can press the humidity below 70%. As long as the personnel enters and exits, the photo machine can work normally. 2, the photo machine working environment space should pay attention to prevent moisture, so as to avoid external moisture being sucked into the room, and remove the moisture on the photo machine. If you accidentally open the window and cause the machine to get wet, first disconnect the power of the photo machine, wipe it with a dry sponge or cotton cloth, and then dry it with an electric fan. 3. The main body of the photo machine should be covered to avoid short circuit caused by the humidity of the relevant circuit boards and components. For sensitive and important parts such as the motherboard, the outer casing should be disassembled and dried by the hot air of the hair dryer. The technician uses a universal meter to test whether there is a short circuit. To ensure that there is no short circuit, you can plug it in, otherwise there is a risk of burning the motherboard and the nozzle. 4, the relevant printing media material storage should pay attention to moisture, the printing medium is easy to absorb moisture and damp, the moisture of the photo printing material is likely to cause the ink to spread and so on. Therefore, the photo print material is put back into the original packaging after each use, and try not to touch the outside world. 5, the image screen printed by the photo machine is dry and slow, and it takes a long time to wait. It is recommended that the user turn on the air conditioner to bring the room temperature to the required room temperature, and the photo machine print heating function or the photo machine related drying equipment should be kept at any time, which can speed up the drying of the image. In particular, when the user needs to cover the screen, it is necessary to wait for the film to be completely dried and then pass through the film. If the film is immediately blurred, the surface may be heated by a hair dryer or a heater.
Previous: No information found
Next: No information found
|